Description
Yongnuo YN650EX-RF is a flash designed for Canon cameras. It is distinguished by an oval-shaped burner and built-in LEDs. It also has a built-in transmitter and receiver compatible with the Yongnuo radio triggering system. The flash offers the ability to work in TTL mode and high flash power.
Unique torch shape
The new oval shape of the torch allows for far more even and soft transitions than is possible with standard rectangular torches.
LED Lamp
Yongnuo YN650EX-RF is not just a system flash. The torch of this model is surrounded by 24 LEDs, which can act as a modeling light. The continuous light source allows for convenient and precise setting of the lighting setup before the first flash. In emergency situations, it can also serve as the main light source during filming.
Flash radio triggering system
The flash has a built-in transmitter and receiver compatible with the Yongnuo RF radio flash triggering system. It works with such models as YN560 III / YN560 IV / YN560TX PRO / YN685 / YN720 / RF605 / RF603 / RF602. Full compatibility list in the table below the description.
Support for optical flash triggering in master mode
Model YN650EX-RF can be used as an optical trigger controller for Yongnuo and Canon EX-series flashes (except YN585EX / YN320EX models).
Slave mode optical flash triggering support
In slave mode, the flash receives a signal from the master unit. Devices compatible in this mode are YN600EX-RT II, YN568EX II, 600EX(II)-RT, 580EX II, Canon 7D / 60D / 600D and other cameras that support “off-camera TTL”.
TTTL and HSS automation
Yongnuo YN650EX-RF is equipped with HSS high-speed sync mode (up to 1/8000 s) and TTL flash power selection automation system. These functions are extremely useful in changing lighting conditions. It also offers first and second curtain shutter synchronization.
Fast charging and external power source
The lamp is powered by 4 rechargeable AA batteries. The time required to charge the burner, after the flash at full power, is only 2 seconds (using rechargeable batteries of lower quality, this time may increase to 3-4 seconds). When connected to an external battery pack flash performance can increase even more.
High flash power
The flash generates a GN of 60 (ISO 100, 200 mm). The high power combined with short charging times ensures that it is ready for action at any time.
Multiple triggering options
The YN650EX-RF offers complete flexibility in the way you trigger. On the camera sled, wirelessly via a radio/optical flash triggering system or via a PC sync cable.
Electronic zoom
The lamp will automatically select the torch zoom depending on the focal length of the lens attached to the camera, it also allows you to switch to manual mode and adjust from 28 – 200 mm.
Intuitive controls
The clear, backlit LCD (Negative Display Screen) and large, comfortable buttons provide comfort. It is also possible to turn on audible signals to indicate when the flash is ready to flash again.
Software Upgrade
The YN650EX-RF flash is equipped with a micro USB port, through which we can update its firmware. The manufacturer cares about the development of their products and ensures compatibility with new camera models. We can download the latest software from the official Yongnuo website
Specification
Model: Yongnuo YN650EX-RF
torch shape: oval (greater flash coverage)
guide count (GN): 60 (ISO 100, 200 mm)
operation modes: TTL, M, Multi, Gr
flash color temperature: 5600 K

• power supply: 4 x AA batteries
  power output: approx. 100 – 1500 flashes (depending on power)

• charging time: approx.

• charging time: about 2 s at full power

• charging time: about 2 s at full power

• flash time: 1/200 – 1/20000 s

• high-speed sync (HSS): up to 1/8000 s

• flash power adjustment: 1/128 – 1/1 with 1/3 EV step

• torch zoom: 28 – 200 mm

• range of torch movement (vertical): -7° – 90°

• range of torch movement (horizontal): 180° – 180°

• LED modeling lamp power: approximately 2 W

• LED lamp color temperature: approximately 5600 K

• optical trigger range: 10 – 25 m

• radio trigger range: up to 100 m

• trigger methods:

• on the sled of the camera or trigger

• radio flash triggering system (radio master/slave)

• optical triggering

• optical flash triggering (Sc, S1, S2external ports:

• Hot shoe (Canon)

• PC sync (for cable release)

• external charging (for extra battery pack)

• external charging (for extra battery pack)

• external charging (for additional battery packs)

• micro USB (for USB cable release)

• micro USB (for software updates)

• additional features:
  Assistant autofocus

• first- or second-curtain shutter synchronization

• exposure compensation

• exposure compensation

• exposure bracketing

• exposure lock

• audible siren (can be turned off)

• power-saving mode

• overheat protection

• automatic saving of last used settings

• Dimensions: 6.5 x 7.8 x 20.4 cm
  weight: 430 g
  Compatibility
  Canon cameras equipped with an ISO standard hot shoe
  Yongnuo RF system (see table below for details)

Kit contents

• • Yongnuo YN650EX-RF flash for Canon

  • flash stand with 1/4″

thread

• • flash cover

•